Does simultaneous comminuted fracture of both radial ends represent a distinct fracture pattern?

BACKGROUND: Although isolated distal radius and radial head fractures are common injuries, simultaneous ipsilateral fractures are uncommon. They can range from simple undisplaced fractures at either end to severely comminuted ipsilateral proximal and distal radial fractures. Few cases have been reported with concomitant comminuted distal radius and radial head fractures, and no treatment guidelines are available. Decisions are often based on personal recommendations. The purpose of our study is to increase awareness of this injury pattern and to discuss the mechanism of injury, treatment approach, and functional outcome. METHODS: Skeletally mature patients with comminuted simultaneous ipsilateral fractures of the distal and proximal radius from 2016 to 2021 were identified and studied retrospectively. Demographic information, mechanism of injury, treatment approach, and complication rate were analyzed. Radiographic assessment for inadequacy or loss of reduction and radiographic parameters of the distal radius, including radial inclination, radial length, and palmar inclination, was performed immediately postoperatively and at the final follow-up. Clinical outcomes were determined by calculating the Visual Analog Scale (VAS) score, measuring the range of motion in both joints, and using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) score at the final follow-up. RESULTS: A total of 11 patients met the inclusion criteria. All had ipsilateral Mason III radial head fractures and type C (according to the Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification) intra-articular distal radius fracture. On-table radial head reconstruction and fixation with a proximal radius plate were used for radial head fractures, and osteosynthesis with an anatomic volar locking plate was used for distal radius fractures. The mean follow-up duration was 32 months (range 12-65 months). At the final follow-up, osseous union of both the radial head and distal radius was observed in all patients. The mean VAS score was 1.5 (range 0-7) at rest and 3.9 (range 0-9) with activities, while the mean QuickDASH score was 32 (range 12-65). No significant complications were recorded. CONCLUSION: Simultaneous comminuted fractures of the ipsilateral distal radius and radial head represent a distinct injury pattern, most likely resulting from high-energy trauma, such as falling from a height onto an outstretched hand. Greater emphasis should be placed on clinical examination and radiological imaging of the elbow in cases of wrist injuries and vice versa. Treatment involving on-table reconstruction of the radial head and open reduction and internal fixation with a volar plate can lead to good radiological and functional outcomes.

Megaprosthetic replacement in complex distal humerus fractures in elderly patients: a case series.

BACKGROUND: Managing distal humeral fractures can be challenging for orthopedic surgeons. There are several treatment options for managing this type of fracture, and the treatment method for these fractures should be based on patient-related factors. In elderly patients with osteoporotic bone and severe comminution of the fracture, adequate fixation can be a major challenge for surgeons. The use of megaprosthesis has been recently proposed in traumatology as an alternative to osteosynthesis or conventional prosthesis for the management of comminuted articular fractures in elderly patients with poor bone stock. METHODS: A consecutive case series of 5 patients who underwent reconstruction of the elbow joint with a trabecular hinged modular elbow megaprosthesis was reviewed retrospectively. All patients included had AO/OTA 13C2 and 13C3 fractures with metaphyseal extension and considerable bone loss of the distal humerus. The primary outcome was the evaluation of functional and clinical outcomes with the MEPS score in comminuted distal humerus fractures with metaphyseal extension and poor bone stock in elderly patients treated with elbow megaprosthesis. The secondary outcome was assessing the treatment-related complication rate of this technique in non-oncological fields. RESULTS: Five patients were included in the study with a mean age of 82.66 ± 7.72 years at surgery. The mean MEPS value was 63 ± 24.2 at 1 month, 81 ± 23.53 at 3 months, 83 ± 24.2 at 6 months, and 84 ± 24.57 at 12 months. No intraoperative complications were recorded in our series. Of 5 patients, four patients had excellent clinical and functional outcomes. We did not encounter wound dehiscence, prosthetic joint infection, aseptic loosening, or periprosthetic fractures. CONCLUSIONS: The indication for this type of treatment must be selected and narrowed down, as it is a salvage procedure, and any failure would cause even more complex situations. Short operating times and early mobilization of the elbow are the advantages of this technique.

Plate fixation optimization for distal femoral fractures with segmental bone loss: Defining the preferred screw distribution using finite element analysis.

OBJECTIVES: Distal femur fractures can exhibit extensive comminution, and open fractures may result in bone loss. These injuries are under high mechanical demands when stabilized with a lateral locked plate (LLP), and are at risk of non-union or implant failure. This study investigates the optimal LLP screw configuration for distal femur fractures with a large metadiaphyseal gap of 5 cm. METHODS: A finite element (FE) model, validated against experimentally measured strains and displacement, evaluated pull-out forces and stress concentration on typical implants under clinical conditions corresponding with the 10 % point during the stance phase of the gait cycle. RESULTS: Maximum stress was up to 83 % less when the ratio (Cp) between the proximal screw-distribution-length and the distance of the first screw to the fracture was less than 0.2; maximum pull-out force was 99 % less when this ratio was higher than 0.4. CONCLUSIONS: Screw configuration based on either normal or osteopenic bone quality plays an important role in determining the risk of construct failure for a major (50 mm) distal femoral metadiaphyseal segmental defect. This study provides valuable information when planning definitive fixation for distal femur fractures with extensive comminution or segmental bone defects, to mitigate the risk of implant failure and subsequent nonunion.

Biomechanical comparison of distal femoral fracture fixation: Polyaxial vs. uniaxial locking screws with different blocking screw configurations in retrograde femoral nailing.

INTRODUCTION: Clinical studies have indicated reduced reliance on blocking screws with the introduction of polyaxial locking nails, yet the biomechanical superiority of polyaxial locking over blocking screws remains unverified, specifically for distal dia-metaphyseal femur fractures. HYPOTHESIS: We hypothesized that the combination of multiaxial locking using three screws and parallel locking reinforced by two blocking screws would result in superior outcomes compared to utilizing only parallel locking with two screws and one blocking screw. MATERIALS AND METHODS: Third-generation custom-made femur models representing AO/OTA 32 A1.2 dia-metaphyseal comminuted oblique fractures were divided into four groups (n=10/group). Group A employed distal fixation with three 4.5-mm polyaxial screws. Group B used two parallel locking screws and two blocking screws, Group C used two parallel locking screws and one blocking screw, and Group D used only two parallel screws. Specimens underwent axial and torsional load testing to assess fatigue strength, ultimate strength, axial stiffness (N/mm), torsional stiffness (N/mm/deg), axial load to failure (N), torsional load to failure (N/mm), coronal and sagittal angulations, and fracture site collapse. RESULTS: Group C exhibited statistically superior torsional stiffness compared to Groups B and D (p=0.039 and p=0.034, respectively). Axial load to failure was highest in Group B and lowest in Group D (p=0.032). Group C demonstrated the highest torsional strength, while Group B exhibited the lowest (p=0.006). Coronal displacement was greatest in Group B, while Group A showed the highest resistance (p=0.009). Group A demonstrated the greatest resistance to fracture site collapse, with the weakest specimens observed in Groups B and C (p=0.01). DISCUSSION: The performance of a single laterally positioned blocking screw is comparable to using two blocking screws. Medial positioning of a second blocking screw is unnecessary for stability enhancement. Multiaxial locking prevents fracture site collapse and coronal plane angulation more effectively than other methods. Multiaxial locking and/or parallel screws with a single laterally positioned blocking screw provide superior stiffness and stability for treating unstable dia-metaphyseal distal femoral fractures. LEVEL OF EVIDENCE: N/A.

Comparison of different internal fixation implants in the treatment of talar neck fractures: A finite element analysis.

OBJECTIVES: This study aimed to analyze the biomechanics of cannulated screws (CS) with or without a lateral locking plate (LLP) in talar neck fractures through a finite element analysis. PATIENTS AND METHODS: The computed tomography image of the talus from a healthy volunteer (adult male) was used to reconstruct a three-dimensional talar model. The method for fixing talar neck fractures with CS and an LLP was planned using computer-aided design software. Afterward, the three-dimensional models of comminuted talar neck fractures were used to simulate fixation with anteroposterior parallel dual CS, single CS+LLP, and dual CS+LLP. Finally, finite element analysis was carried out to compare the outcomes of dual CS+LLP to those of single CS+LLP and to those of using dual CS alone. The displacement and von Mises stress values of the three groups with different internal fixation were analyzed. RESULTS: For a simple talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.407 mm), while dual CS (0.459 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (5.38 MPa), while dual CS (8.749 MPa) showed the highest amount of total peak stresses. For a comminuted talar neck fracture, the lowest amount of displacement was obtained with CS+LLP (0.398 mm), while dual CS (0.408 mm) showed the highest amount of total displacement; the lowest amount of peak stresses was obtained with CS+LLP (129.9 MPa), while dual CS (205.9 MPa) showed the highest amount of peak stresses. CONCLUSION: Compared to the other two groups, the dual CS+LLP group had better biomechanics properties in the displacement and stress peak of the talus and implant. Thus, the use of dual CS+LLP fixation is recommended for the surgical treatment of comminuted talar neck fractures.

Can multiple miniplates improve the treatment of comminuted patellar fracture?

BACKGROUND: We have applied primarily multiple locking compression miniplates in treating multifragmentary, comminuted patellar fracture in combination with conventional fixation methods. METHODS: Medical and radiologic data were retrospectively reviewed for the patients surgically fixated with locking compression miniplates in patellar fracture of AO/OTA 34-C3. The primary outcome was bone union at the final follow-up, and the secondary outcomes were functional outcomes and postoperative complications associated with the procedure. For the functional assessment, the Lysholm score, Tegner scores, and the knee range of motion was compared. RESULTS: A total of twenty patients with AO/OTA 34-C3 patellar fracture were included in the study with an average follow-up period of 15 months (range:11 ~ 18 months) between June 2018 and November 2021. Eleven male and nine female patients presented an average age of 57.15 years. The primary fracture union was seen in all twenty patients, and the average time to the union was 15.6 weeks on serial radiograph follow-up. All patients did not show any postoperative complications, such as fixation failure, infection, or revision operations. Postoperatively, all patients achieved an average range of motion of 130 degrees, and the Lysholm and Tegners scores showed an average of 90.4 and 5.0 at the final follow-up, retrospectively. CONCLUSION: Fixations with miniplates in comminuted patellar fractures can be a useful option for effective osteosynthesis due to their versatile, efficient, and low-profile nature.

Lateral tibial plateau fractures with posterior comminution. Can a rim plate offer sufficient support?

Tibial plateau fractures with posterior comminution are difficult to reduce and stabilise. Standard lateral approach doesn't offer adequate visualisation. Posterior approach is suitable for isolated posterior fractures. The addition of a specifically contoured rim plate can enable fixation of posterior fragments through a modified lateral approach.The purpose of this study was to evaluate the advantages and limitations of this novel technique. We present a prospective series of 16 tibial plateau fractures with posterolateral depression, operated over a period of 7 years (04.2014-09.2021). The mean age of the patients was 52 years .They were followed for an average period of one year.Clinical and functional assessment was performed according to the criteria of Knee Society Clinical Rating Score. The lateral and posterior component of the fracture was stabilised by a horizontal rim plate, through a posterolateral approach, with or without fibular osteotomy. 9 patients had excellent, 5 had good, 2 had average ratings. The average objective rating was 87,5 (70- 97), and the average functional rating was - 74,4 (40-100). The average ROM was 110° (100°-120°). Two of the fractures healed in 5° varus and 8° valgus respectively. One knee joint ended up with 10° flexion deficit. Three knees had medio- lateral instability, with no functional impairment. In 4 cases the K wires of the weber fibular osteotomy fixation migrated. The absence of late articular collapse of the treated fractures may be attributed to the initial stability of fixation.The addition of a rim plate addresses the posterior comminution and makes early rehabilitation safe.

A Type IV Extension Supracondylar Fracture With Comminuted Fracture Pattern: A Case Report.

CASE: A three year, 11 month old girl sustained a right displaced extension supracondylar fracture (ESF) of the humerus with comminution of the lateral column after an indoor fall. At surgery, fracture reduction showed multidirectional instability. Adequate reduction was achieved by applying longitudinal traction of the arm with partial elbow flexion and forearm supination. One percutaneous medial pin, followed by one lateral cross pin, was used to immobilize the fracture. Normal posterolateral new periosteal bone formation was seen on radiograph on the lateral side. At 5-year follow-up, she had full range of asymptomatic and symmetrical elbow motion. CONCLUSION: This case report shows a displaced ESF with a comminuted lateral humeral column, which contributed to a lack of adequate lateral pin purchase on bone. A modified pin fixation technique first with a medial pin and followed by a lateral pin with both placed through the medial column was used for stable fracture fixation. In addition, this case showed that fracture comminution was a contributory factor to the rare multidirectional instability of the Gartland Type IV fracture.

Prevalence and Predictors of Peroneal Tendon Instability Accompanying Calcaneal Fractures.

BACKGROUND: We aimed to find the prevalence of peroneal tendon instability (PTI) accompanying different types of calcaneal fractures and to determine predictors of PTI based on preoperative CT scanning. METHODS: In a retrospective cross-sectional study, preoperative CT scans of 400 consecutive calcaneal fractures undergoing surgery were reviewed for comminuted fragments in the lateral gutter of the ankle, fractures at the tip of the lateral malleolus, dislocated peroneal tendons, excessive displacement of the lateral calcaneal wall, calcaneal fracture-dislocation, superior peroneal retinaculum (SPR) avulsion fracture (fleck sign), and shape of the retromalleolar groove. The correlation of these variables with intraoperative SPR stress test, defined as the diagnostic criteria for PTI in calcaneal fractures, was evaluated. RESULTS: In total, 369 patients (mean age, 39 ± 13; range, 11-72 years), with 321 (87.0%) of them male, were included. Among all calcaneal fractures, 67 cases (16.7%) had associated PTI as confirmed intraoperatively by an SPR stress test. A statistically significant association was found between PTI in calcaneal fractures and comminuted fragments in the lateral gutter of the ankle (P = .03), dislocated peroneal tendons (P < .001), calcaneal fracture-dislocation (P < .001), SPR avulsion fracture (P < .001), and Sanders type IV of calcaneal fracture (P = .02). There was no statistically significant relationship between PTI and the mechanism of injury (P = .98), side of fracture (P = .30), uni- or bilateral calcaneal fractures (P = .27), a fracture at the tip of lateral malleolus (P = .69), shape of the retromalleolar groove (P = .78), or excessive displacement of the lateral calcaneal wall (P = .06). The most specific CT finding to predict PTI accompanying calcaneal fractures was calcaneal fracture-dislocation (99.1%). CONCLUSION: Following calcaneal fracture fixation, PTI was confirmed with intraoperative SPR stress test in one-sixth of cases. With the exception of calcaneal fracture-dislocation, preoperative findings on CT scanning and calcaneal fracture pathoanatomy are insufficient to diagnose PTI accompanying calcaneal fractures. LEVEL OF EVIDENCE: Level III, retrospective case control study.

Impact of Different Osteotomy Techniques on Bone Reserve in the Osteotomy Line in Sagittal Split Osteotomy: Experimental In Vitro Study in Caprine Mandible Model.

OBJECTIVE: The objective of this study was to investigate of the effect of piezzo and conventional osteotomy techniques on bone reserve in the osteotomy line and comminuted fracture ratios that is able to compromise bone to bone contact negatively. METHODS: Bilateral sagittal split ramus osteotomy was performed on 12 fresh male Thracian curly caprine mandible. In the first group (n: 12) osteotomies were performed with piezzo device. In the second group (n: 12) osteotomies were performed with micromotor and manual osteotomes. Operative time was measured. The number of comminuted fractures, length and width of the osteotomy, and the space between the osteotomy lines was evaluated from 3-dimensional computed tomography scans. RESULTS: The mean value of procedure duration was 320.4±10.76 seconds for piezo osteotomy and 238.8±8.29 seconds for conventional micromotor ( P <0.0001). Number of comminuted fractures was 1.41±1.3 in piezoelectric group, 1.5±1.3 in conventional group and the difference was not statistically significant (p: 0,88). Osteotomy lengths and widths were 35.58±5.2, 2.196±1.9 and 36.23±5.05, 2.27±1.85 in the piezzo and conventional groups, respectively. (p lengths :0,75; p widths :0,92) The volume of the bony interface between the distal and proximal segments of the mandible after osteotomy was 166.3±184.2 mm 3 in the piezzo group and 163.5±129.3 mm 3 in the conventional group (p: 0,96). CONCLUSION: The piezo surgery and the conventional osteotomy were found to be similar in terms of the gap between the distal and proximal mandible and the number of comminuted fractures. The duration to perform the conventional osteotomy was found to be shorter than the piezo surgery.

Differences in Pilon Fractures According to Ipsilateral Fibular Injury Patterns: A Clinical Computed Tomography-Based Mapping Study.

Background: Preoperative verification of fracture morphology is essential for determining the definitive fixation strategy in the management of a pilon fracture. This study aimed to determine the correlation between fibular injury patterns and fracture morphologies and introduce clinical implications. Methods: Computed tomography scans of 96 pilon fractures were retrospectively analyzed and divided into three types: intact fibula, simple fracture, and multifragment fracture. The principal fracture line and comminution zones were illustrated on a plafond template and diagrammatized on a 6 × 6 grid using PowerPoint software as fracture mapping. Correlations between fibular injury patterns and fracture morphologies, including comminution zones and principal fracture lines, were analyzed. Results: The thickest comminution zone was most often located in the anterolateral quadrant. According to fibular injury patterns, the comminution zone of the multifragment group was placed two grids more lateral than that of other groups. Lateral exits of the principal fracture line in the multifragment group were much more concentrated within the fibular incisura. Conclusions: In pilon fractures, a more complex fibular fracture pattern was related to the valgus position. Moreover, the articular fracture pattern of pilon fractures differed according to coronal angulation and fibular fracture pattern. These differences should influence the operative approach and placement of the plate.

External mandibular fixation for gunshot fractures: report of 2 cases.

High-energy ballistic injuries may cause comminuted facial fractures. Treatment of such fractures might be challenging because of in-fection and soft- and hard-tissue loss. These cases may not be amenable to open reduction and internal fixation. We present 2 cases of gunshot fractures, for which external fixation was used as a surgical step before definitive treatment. With the use of external fixation, existing infection had been controlled and soft tissues had been restored, which allowed oral rehabilitation with reconstruction plates and autogenous bone grafting, if needed.

Irreducible Tibial Pilon Fracture Treated with Single-Stage Closed Ilizarov Fixation and Gradual Correction: A Case Report.

CASE: A young polytrauma victim of a road traffic accident was diagnosed with comminuted articular fracture of the left distal tibial pilon and open segmental fracture of the fibula. The comminuted distal tibial metaphysis was translocated into the interosseous space and, hence, was irreducible. He underwent single-stage closed Ilizarov device stabilization and gradual postoperative closed reduction to obtain good functional outcome at 9 months. The lung and scapular injuries were treated conservatively. CONCLUSION: Acute complex irreducible tibial pilon fracture can be treated according to principles of deformity correction with the Ilizarov device.

Successful treatment of a multifocal comminuted open fracture of humerus with severe soft tissue defect: a case report.

BACKGROUND: Choosing the appropriate treatment approach for a multifocal comminuted open fracture of humerus with severe soft tissue defect is a challenging issue, which could be interesting for every orthopedic surgeon especially for those working in the trauma centers. CASE PRESENTATION: This study described an innovative approach using titanium elastic nailing to treat a multifocal comminuted open fracture of humerus with severe soft tissue defect. In this study, we report a 40-year-old Persian female patient in whom the treatment achieved complete fracture union and skin graft healing by elastic medullary nailing, vacuum dressing, and skin grafting. CONCLUSIONS: Elastic medullary nailing is a viable option for reconstruction of simultaneous comminuted fracture and soft tissue defect.

What makes vertical femoral neck fracture with posterior inferior comminution different? An analysis of biomechanical features and optimal internal fixation strategy.

BACKGROUND AND PURPOSE: Fracture comminution occurs in 83.9%-94% of vertical femoral neck fractures (VFNFs), the majority of which were located in posterior-inferior region, and poses a clinical challenge in fixation stability. We conducted a subject-specific finite element analysis to determine the biomechanical features and optimal fixation selection for treating VFNF with posterior-inferior comminution. PATIENTS AND METHODS: Eighteen models with three fracture types (VFNF without comminution [NCOM], with comminution [COM], with comminution + osteoporosis [COMOP]) and six internal fixation types (alpha [G-ALP], buttress [G-BUT], rhomboid [G-RHO], dynamic hip screw [G-DHS], invert triangle [G-ITR], femoral neck system (G-FNS)) were created based on the computed tomography data. By using the subject-specific finite element analysis method, stiffness, implant stress, yielding rate (YR) were compared. Additionally, in order to elucidate distinct biomechanical characters of different fracture types and fixation strategies, we calculated interfragmentary movement (IFM), detached interfragmentary movement (DIM), shear interfragmentary movement (SIM) of all fracture surface nodes. RESULTS: Generally, in comparison with NCOM, COM showed a 30.6% reduction of stiffness and 1.46-times higher mean interfragmentary movement. Besides, COM had a 4.66-times (p = 0.002) higher DIM at the superior-middle position, but similar SIM across fracture line, which presented as varus deformation. In COM and COMOP, among all six fixation strategies, G-ALP had significantly the lowest IFM (p<0.001) and SIM (p<0.001). Although G-FNS had significantly highest IFM and SIM (p<0.001), it had the highest stiffness and lowest DIM (p<0.001). In COMOP, YR was the lowest in G-FNS (2.67%). CONCLUSIONS: Posterior-inferior comminution primarily increases superior-middle detached interfragmentary movement in VFNF, which results in varus deformation. For comminuted VFNF with or without osteoporosis, alpha fixation has the best interfragmentary stability and anti-shear property among six current mainstream fixation strategies, but a relatively weaker stiffness and anti-varus property compared to fixed-angle devices. FNS is advantageous owing to stiffness, anti-varus property and bone yielding rate in osteoporosis cases, but is insufficient in anti-shear property.

The effect of integrity of lesser tuberosity-medial calcar on postoperative outcome in the proximal humeral fracture.

BACKGROUND: In proximal humeral fractures, the medial calcar is often considered an important stabilizing structure. When the medial calcar is disrupted, some patients may have accompanying humeral lesser tuberosity comminution that has not been noticed. To investigate the impacts of comminuted fragments of lesser tuberosity and calcar on postoperative stability, CT results, number of fragments, cortical integrity, and the variation of neck-shaft angle were compared in patients with proximal humeral fractures. MATERIALS AND METHODS: From April 2016 to April 2021, this study included patients with senile proximal humeral fractures diagnosed by CT three-dimensional reconstruction with lesser tuberosity fractures and medial column injuries. The number of fragments in the lesser tuberosity and the continuity of medial calcar were evaluated. Postoperative stability and shoulder function were evaluated by comparing changes in neck-shaft angle and the DASH upper extremity function score from 1 week to 1 year after the operation. RESULTS: A total of 131 patients were included in the study, and the results showed that the number of fragments of the lesser tuberosity was related to the integrity of the medial cortex of the humerus. That is, when there were more than two lesser tuberosity fragments, the integrity of humeral medial calcar was poor. The positive rate of the lift-off test was higher in patients with lesser tuberosity comminutions 1 year after surgery. In addition, patients with more than two lesser tuberosity fragments and continuous destruction of the medial calcar had large variations in the neck-shaft angle, high DASH scores, poor postoperative stability, and poor recovery of shoulder joint function 1 year postoperatively. CONCLUSION: The number of humeral lesser tuberosity fragments and the integrity of the medial calcar were associated with the collapse of the humeral head and the decrease in shoulder joint stability after the proximal humeral fracture surgery. When the number of lesser tuberosity fragments was greater than two and the medial calcar was damaged, the proximal humeral fracture had poor postoperative stability and poor functional recovery of the shoulder joint, which required auxiliary internal fixation treatment.

Nonanatomic healing of the greater tuberosity after plating in proximal humeral fractures: a case control study.

BACKGROUND: Open reduction and plate internal fixation (ORIF) is one of the most common treatment methods for proximal humeral fractures. Complications associated with the greater tuberosity (GT) are rarely reported, therefore, the purpose of this study was to analyze the complications associated with the GT and the risk factors after locked-plate internal fixation. METHODS: We retrospectively analyzed the medical and radiographic data of patients with proximal humeral fractures involving the GT treated with locking plates between January 2016 and July 2019. We divided all patients into two groups, the anatomic GT healing group and the nonanatomic GT healing group, depending on the radiographic outcomes of the GT. Clinical outcome was assessed by the Constant scoring system. Potential risk factors included preoperative and intraoperative factors. Preoperative factors included sex, age, body mass index, fracture type, fracture-dislocation, proximal humeral bone mineral density, humeral head extension, hinge integrity, comminuted GT, volume and surface area of the main GT fragment, and displacement of the main GT fragment. Intraoperative factors were adequate medial support, residual head-shaft displacement, head-shaft angle and residual GT displacement. Univariate logistic regression and multivariate logistic regression were used to identify risk factors. RESULTS: There were 207 patients (130 women and 77 men; mean age, 55 years). GT anatomic healing was observed in 139 (67.1%) patients and nonanatomic healing in 68 (32.9%). Patients with GT nonanatomic healing had significantly inferior Constant scores than those with GT anatomic healing (75.0 ± 13.9 vs. 83.9 ± 11.8, P < 0.001). Patients with high GT malposition had worse Constant scores than patients with low GT malposition (73.3 ± 12.7 vs. 81.1 ± 11.4, P = 0.039). The multivariate logistic model showed that GT fracture characteristics were not risk factors for nonanatomic GT healing, while residual GT displacement was. CONCLUSIONS: Nonanatomic healing of the GT is a high-rate complication of proximal humeral fractures, resulting in inferior clinical outcomes, especially for high GT malposition. Fracture characteristics of the GT are not risk factors for GT nonanatomic healing and GT comminution should not be regarded as a contraindication to ORIF for proximal humeral fractures.

A retrospective comparison of double-hooked locking plates versus non-locking plates in minimally invasive percutaneous plate osteosynthesis for the treatment of comminuted distal fibular fractures accompanied by tibial Pilon fractures.

BACKGROUND: Surgical approach and fixation material are crucial in the treatment of comminuted distal fibular fractures accompanied by tibial Pilon fractures. This study compared the efficacy of double-hooked locking plates and anatomic plates in minimally invasive percutaneous plate osteosynthesis (MIPPO) for the treatment of comminuted distal fibular fractures accompanied by tibial Pilon fractures. METHODS: Clinical data were collected from 96 patients diagnosed with comminuted distal fibular fractures accompanied by tibial Pilon fractures who had undergone MIPPO. Patients in the study group (n = 48) received double-hooked locking plate fixations and the control group (n = 48) received anatomical plate fixations. The operating time, intraoperative bleeding, length of hospital stays, full weight-bearing time, fracture healing time and complication rates in the two groups were compared. The quality of fracture reduction was evaluated using the Burwell-Chamley imaging scoring system; the ankle function was assessed based on the American Orthopaedic Foot and Ankle Society Ankle-Hindfoot Score. RESULTS: Patients in the study group had shorter operating time, less bleeding, significantly shorter hospital stays, and shorter time to full weight-bearing as well as fracture healing compared to the control group (P < 0.05). Additionally, the post-operative complication rates were significantly lower in the study group (6.16% vs. 22.92%) (P < 0.05), but there was no significant difference in the fracture reduction rate between the two groups (P > 0.05). Patients in the study group experienced better ankle recovery than those in the control group (93.75% vs. 75.00%) (P < 0.05). CONCLUSION: Double-hooked locking plates have advantages in the treatment of comminuted distal fibular fractures accompanied by tibial Pilon fractures during MIPPO due to their shorter operating time and less intraoperative bleeding, as well as shorter hospital stays, full weight-bearing time and fracture healing time, fewer complications and better ankle recovery. Therefore, double-hooked locking plates are worthy of clinical application.

Acute limb shortening and modified pantarsal arthrodesis for the treatment of a highly comminuted distal tibial articular fracture in a dog.

A three-year-old female spayed Lurcher was referred for the treatment of a highly comminuted distal tibial articular fracture. Resection of the area of comminution with a transverse osteotomy of the tibial diaphysis and talar ridges was performed, followed by modified pantarsal arthrodesis and a calcaneotibial screw. The treatment resulted in 7 cm of tibial shortening, equating to a 28% reduction in the total tibial length. Radiographic union of the arthrodesis was successful. Fair use of the pelvic limb was documented long-term. Combined acute limb shortening and modified pantarsal arthrodesis resulted in an acceptable outcome and could be considered in cases of highly comminuted distal tibial fractures.

Pin and Wire System Fixation for the Treatment of Comminuted Patella Fractures.

We describe the wiring technique and evaluate the radiographic and clinical outcomes of treatment with a pin and wire system (PWS) for comminuted patella fractures. From June 2013 to October 2018, 33 patients with comminuted patella fractures were treated using a PWS. Open reduction and internal fixation was performed with multiple pins and a wire. All patients were allowed full weight bearing without a brace. Radiographs were obtained to evaluate bone union, implant breakage, back-out of pins, and intra-articular gaps and step-off. Clinical outcomes and postoperative complications were assessed at final follow-up examination. All fractures were united. Thirteen cable wires in 13 patients were partially broken without displacement of fracture at an average of 7.4 months (range, 1-19 months) postoperatively. The average preoperative, postoperative, and final follow-up intra-articular gap and step-off were 11.7 mm, 0.5 mm, and 0.03 mm and 6.6 mm, 0.4 mm, and 0.2 mm, respectively. The average postoperative pin displacement was 0.1 mm (range, 0-0.8 mm). Deep infection was not observed after the surgery. The implant removal rate was 21% (7 of 33). Among these, the symptomatic implant removal rate was 9% (3 of 33). Additionally, 3 of 7 patients with implant removal had broken wires. The average flexion and extension of knee joints were 139.7° (range, 120°-150°) and -0.9° (range, -10° to 0°), respectively. A PWS prevents back-out of the pins and reduces intra-articular gaps and step-off distances to acceptable levels, even if the cable wire is partially broken. Therefore, a PWS is a good treatment option for comminuted patella fractures. [Orthopedics. 2023;46(5):291-296.].